Steel Coil Weight Calculator

Steel Coil Weight Formula:

\[ W = \pi \times \left(\left(\frac{OD}{2}\right)^2 - \left(\frac{ID}{2}\right)^2\right) \times Width \times Density \]

Outer Diameter (OD):

meters

Inner Diameter (ID):

meters

Width:

meters

Density:

kg/m³

Coil Weight (kg):

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is a Steel Coil Weight Calculator?

Definition: This calculator estimates the weight of a steel coil based on its dimensions and material density.

Purpose: It helps manufacturers, engineers, and metal workers determine the weight of steel coils for transportation, storage, and material planning.

2. How Does the Calculator Work?

The calculator uses the formula:

\[ W = \pi \times \left(\left(\frac{OD}{2}\right)^2 - \left(\frac{ID}{2}\right)^2\right) \times Width \times Density \]

Where:

\( W \) — Weight of steel coil (kg)
\( OD \) — Outer diameter of the coil (meters)
\( ID \) — Inner diameter (core diameter) of the coil (meters)
\( Width \) — Width of the coil (meters)
\( Density \) — Material density (kg/m³, default 7850 for steel)

Explanation: The formula calculates the cross-sectional area of the coil ring and multiplies it by the width and density to get the total weight.

3. Importance of Steel Coil Weight Calculation

Details: Accurate weight calculation is crucial for logistics, structural design, inventory management, and cost estimation in metalworking industries.

4. Using the Calculator

Tips: Enter the outer diameter, inner diameter, width (all in meters), and material density (default 7850 kg/m³ for steel). All values must be > 0 and OD must be greater than ID.

5. Frequently Asked Questions (FAQ)

Q1: What's the typical density for steel?
A: The default density is 7850 kg/m³ for carbon steel. This may vary slightly for different steel alloys.

Q2: How do I measure the coil dimensions?
A: Measure OD and width with a tape measure. ID is typically the diameter of the core/mandrel.

Q3: Can I use this for other metals?
A: Yes, just change the density value (e.g., 2700 kg/m³ for aluminum, 8940 kg/m³ for copper).

Q4: What if my coil isn't perfectly round?
A: This calculation assumes perfect cylindrical shape. For irregular coils, consider adding a safety factor.

Q5: How accurate is this calculation?
A: It's theoretically accurate for perfect coils. Real-world factors like uneven winding may cause slight variations.